Best Audio Interfaces for Home Recording (2026)

The best USB audio interfaces for recording vocals, guitar and podcasts at home, compared on inputs, preamp gain, headphone outputs and loopback.

By
Sajime
Published
Reading time
5 min

DisclosureWe may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.

Our picks at a glance

Our picks at a glance
#ProductBest forRatingLinks
01Focusrite Scarlett 2i2 (4th Gen)Best overall
02MOTU M2Best metering and monitoring
03Solid State Logic SSL 2 MKIIBest for recording with a partner
04Audient iD4 MKIIBest compact one-mic interface
05Focusrite Scarlett Solo (4th Gen)Best for solo singer-songwriters
06Behringer U-PHORIA UMC202HDBest budget pick
No.1Best overall
Focusrite

Focusrite Scarlett 2i2 (4th Gen)

Two mic inputs, the highest listed preamp gain in this guide (69 dB per Focusrite), plus Auto Gain and Clip Safe to help beginners avoid ruined takes.

Inputs
2 mic preamps (combo XLR/line/instrument)
Outputs
2 balanced line outputs, 1 headphone output
Conversion
24-bit / up to 192 kHz
No.2Best metering and monitoring
MOTU

MOTU M2

A full-color LCD shows levels for every input and output. You also get loopback for streaming and a MIDI in/out.

Inputs
2 mic/line/Hi-Z combo inputs, 48V phantom power
Outputs
2 balanced TRS, 2 RCA (mirrored), 1 headphone output
Sample rates
44.1 to 192 kHz
No.3Best for recording with a partner
Solid State Logic

Solid State Logic SSL 2 MKII

Two headphone outputs, 64 dB of gain, stereo loopback and the Legacy 4K switch for added color.

Inputs
2 mic/line combo inputs (high-pass filter, 48V), 2 instrument inputs
Outputs
2 balanced monitor outputs, 2 headphone outputs (same mix)
Converters
32-bit / 192 kHz
No.4Best compact one-mic interface
Audient

Audient iD4 MKII

One Audient console preamp, a JFET instrument input and two headphone outputs in a small desktop box with a big volume knob.

Inputs
1 Audient console mic preamp, 1 JFET instrument input
Mic preamp gain
58 dB
Phantom power
Full 48V, also when bus powered
No.5Best for solo singer-songwriters
Focusrite

Focusrite Scarlett Solo (4th Gen)

The simplest way to record one vocal mic and one guitar at the same time, with Focusrite's Air mode and a DAW bundle.

Inputs
1 mic preamp (XLR), 1 instrument/line input
Outputs
2 balanced line outputs, 1 headphone output
Conversion
24-bit / up to 192 kHz
No.6Best budget pick
Behringer

Behringer U-PHORIA UMC202HD

Two Midas-designed mic preamps with switchable phantom power and direct monitoring.

Inputs
2 combo XLR/1/4" inputs (mic, line, instrument)
Mic preamps
2 Midas-designed
Phantom power
+48V, switchable

The best audio interface for most home studios is the Focusrite Scarlett 2i2 (4th Gen). It has two mic inputs, the highest listed preamp gain in this group, and Auto Gain to set your levels for you. Want detailed level meters and MIDI? Get the MOTU M2. Recording with a partner? The SSL 2 MKII has two headphone outputs. Only ever recording yourself? The Scarlett Solo or Audient iD4 MKII is enough. On a tight budget, look at the Behringer UMC202HD.

Quick comparison

Interface Mic inputs Mic gain (manufacturer) Headphone outs Loopback
Focusrite Scarlett 2i2 (4th Gen) 2 69 dB 1 Yes
MOTU M2 2 Not listed 1 Yes
SSL 2 MKII 2 64 dB 2 (same mix) Yes (stereo)
Audient iD4 MKII 1 58 dB 2 Yes
Focusrite Scarlett Solo (4th Gen) 1 57 dB 1 Yes
Behringer UMC202HD 2 Not listed 1 Not listed

All specs come from the makers’ own product pages and support docs. “Not listed” means we couldn’t find the figure or feature there. It doesn’t mean it’s low or missing.

How to choose an audio interface

1. Count your inputs

This is the decision that matters most. A one-mic interface (Scarlett Solo, iD4 MKII) is fine for a solo singer, voice-over or one-person podcast. If you’ll ever want two mics at once (an interview, a duet, stereo guitar), buy a two-mic interface now. It’s cheaper than buying twice.

2. Match the preamp gain to your mic

Condenser mics like the Audio-Technica AT2020 are sensitive and need little gain. Low-output dynamic mics like the Shure SM7B need a lot. Planning on an SM7B? Favor the interfaces at the top of the gain column, or budget for an inline booster.

3. Headphone outputs

Two headphone outputs (SSL 2 MKII, Audient iD4 MKII) let a co-host or a student listen without a splitter.

4. Loopback for streaming and podcasts

If you stream or record calls, loopback lets you capture computer audio along with your mic. All of these list it except the UMC202HD. On the Focusrites, you set it up in Focusrite Control 2.

5. Power and connection

All six run on USB power, so there’s no separate power supply. Two things to know: Audient says the iD4 MKII needs a USB 3.0 connection when bus powered, and the UMC202HD uses an older USB Type-B socket. With a USB-C-only laptop, you may need a different cable or an adapter.

The picks in detail

Focusrite Scarlett 2i2 (4th Gen): best overall

The 2i2 covers the most situations. You get two mic inputs, the highest gain figure in this list (69 dB per Focusrite) and two features aimed at beginners. Auto Gain sets your level while you sing or play. Clip Safe turns the gain down if a peak is about to clip. Focusrite also lists Air mode, 24-bit/192 kHz conversion and USB-C bus power, and bundles Pro Tools Intro+, Ableton Live Lite and Cubase LE.

Skip it if you only record yourself. The Scarlett Solo does the same job for one mic.

MOTU M2: best metering and monitoring

The M2’s standout is its full-color LCD meter for every input and output. Setting levels becomes something you can see, not guess. MOTU lists 120 dB of output dynamic range and -129 dBu EIN on the mic inputs, plus loopback, a 5-pin MIDI in/out, and RCA outputs alongside the balanced TRS outs.

Skip it if you need two headphone outputs.

SSL 2 MKII: best for recording with a partner

Two front-panel headphone outputs and two mic preamps make the SSL 2 MKII a natural fit for duets, lessons and two-person podcasts. SSL says both headphone outputs carry the same mix. It also lists lists 64 dB of gain with -130.5 dBu EIN, a high-pass filter on each mic channel, 32-bit/192 kHz converters and stereo loopback. There’s also the Legacy 4K switch, which SSL says adds harmonic distortion and a high-frequency boost.

Skip it if you want the simplest possible box. There are more switches here than on the Focusrites.

Audient iD4 MKII: best compact one-mic interface

The iD4 MKII has one Audient console mic preamp (58 dB of gain), a JFET instrument input, and two headphone outputs that Audient rates for headphones up to 600 ohms. It also has a loopback mixer, and Audient says it delivers full 48V phantom power on bus power.

Skip it if you need two mic inputs, or your computer only has USB 2.0 ports.

Focusrite Scarlett Solo (4th Gen): best for solo singer-songwriters

One mic input plus one instrument input is the classic setup for a singer with a guitar. Focusrite lists 57 dB of gain, 24-bit/192 kHz conversion, Air mode and the same software bundle as the 2i2. It’s the interface in our starter home studio stack.

Skip it if you’re buying a low-output dynamic mic like the SM7B.

Behringer UMC202HD: best budget pick

Behringer lists two Midas-designed preamps, switchable +48V phantom power, 24-bit/192 kHz conversion and a direct monitor switch. It’s the budget route to two mic inputs in this list. The connection is USB 2.0 Type-B, and Behringer rates its power draw at up to 2.5 W over USB.

Skip it if you want loopback for streaming, on-screen metering or a USB-C socket.

Common mistakes to avoid

  • Buying more inputs than you’ll ever use. An 8-input interface adds size and complexity you don’t need for one vocal mic.
  • Ignoring the mic. If you’re planning on an SM7B, check the gain first.
  • Forgetting headphones. You need closed-back headphones to record without bleed.

How we tested

We haven't tested these interfaces ourselves yet. This guide compares the makers' own specs (Focusrite, MOTU, Solid State Logic, Audient and Behringer product pages and support docs), the features that matter for home recording (inputs, preamp gain, headphone outputs, loopback, power) and long-term owner reports on drivers and reliability. Once we've recorded vocals, guitar and speech through each one, we'll add our notes and clips.

Frequently asked questions

Q1How many inputs does a home studio interface need?

Count the sources you record at the same time. One singer with a guitar plugged straight in needs one mic input and one instrument input. Two podcast hosts, or a vocal plus a miked guitar, need two mic inputs.

Q2How much preamp gain do I need?

Condenser mics and most handheld dynamics are usually fine with 55 to 60 dB. Low-output dynamic mics like the Shure SM7B do better with more, so an interface with 64 dB or more (SSL 2 MKII, Scarlett 2i2 4th Gen) is a better match. You can also add an inline mic booster.

Q3What is loopback and do I need it?

Loopback sends your computer's audio (a game, a video call, a backing track) into your recording or stream along with your mic. You need it for streaming and some podcast setups. For music recording it's optional.

Q4Does 192 kHz matter for home recording?

Rarely. Most music and podcasts are recorded at 44.1 or 48 kHz. Low preamp noise, enough gain and stable drivers matter more than the maximum sample rate.

Q5Do USB-C interfaces work with an iPad or phone?

Many class-compliant interfaces do, but bus-powered models may need a powered hub. Check the maker's compatibility page for your device before you buy.