USB Mic vs XLR Mic + Interface: Which Should You Buy?

USB mic or XLR mic with an audio interface? What each setup does, where each one wins for podcasting, streaming and music, and the hybrid mics that do both.

By
Sajime
Published
Reading time
5 min

DisclosureWe may earn a commission when you buy through links on this site, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.

If it’s just you talking into a computer (a solo podcast, streaming, voice-over, video calls), get a USB mic. One cable, no extra box, done. If you’ll record more than one mic at once, record instruments, or want to upgrade the mic and the interface separately down the road, get an XLR mic plus an audio interface. Still torn? A hybrid mic with both USB and XLR outputs, like the Shure MV7+, lets you start on USB and move to an interface later.

We haven’t lived with both setups side by side yet. Once we have, we’ll add notes here on what using each one is like day to day, from setup time to levels and monitoring.

Side by side

USB mic XLR mic + interface
What you plug in Mic → computer Mic → XLR cable → interface → computer
Parts to buy 1 3 (mic, cable, interface)
Mics at once Usually one per computer As many as the interface has inputs
Instruments No Yes, via the interface’s instrument input
Upgrade path Replace the whole mic Swap the mic or the interface on its own
Mic choice Limited to USB models Almost every studio and broadcast mic
Best for Solo podcast, streaming, calls, voice-over Music, two-person podcasts, growing studios

What’s inside a USB mic

Think of a USB mic as a microphone with a tiny audio interface hidden inside. There’s a preamp, a converter that turns the analog signal into digital audio, and often a headphone jack. That’s why it can plug straight into your computer.

Where it wins:

  • Simplicity. One cable, no drivers on most systems, and no juggling gain across two devices.
  • Space and travel. Nothing else on your desk, and it’s easy to throw in a bag.
  • Built-in processing. Lots of USB mics come with software or on-board DSP. The Shure MV7+, for example, offers a digital pop filter and a real-time denoiser over USB, per Shure.

Where it falls short:

  • One mic per computer, in practice. Most recording software only records from one audio device at a time. Running two USB mics takes workarounds like a macOS aggregate device, and the two mics’ clocks can drift apart over a long recording.
  • No instruments. There’s nowhere to plug in a guitar or keyboard.
  • Upgrades mean starting over. The preamp and converter live inside the mic, so a better mic means replacing all of it.

How an XLR mic and interface fit together

The mic sends an analog signal down a balanced XLR cable to an audio interface. The interface handles the preamp, phantom power for condenser mics, and the conversion, then passes digital audio to your computer over USB.

Where it wins:

  • Multiple inputs. A two-input interface like the Focusrite Scarlett 2i2 records two mics, or a mic and a guitar, on separate tracks at the same time.
  • Mic choice. Nearly every classic studio and broadcast mic is XLR, including the Shure SM58 and SM7B.
  • Modular upgrades. Keep the mic and upgrade the interface, or the other way round.
  • Longer, sturdier cables. XLR cables lock in place, and balanced cables are designed to run long distances with little noise.

Where it falls short:

  • More to buy and set up. Mic, cable, interface, and usually a stand or boom arm.
  • Gain matching. Some dynamic mics have low output and need an interface with plenty of clean gain. Shure lists the SM7B at -59 dBV/Pa, which is why people often pair it with a high-gain interface or an inline booster.

Which one for your use?

You want to… Better choice Why
Start a solo podcast or stream USB (or hybrid) Simplest setup, one cable
Record a two-person podcast XLR + interface or podcast mixer Two mics on separate tracks
Sing over backing tracks XLR + interface Better mic choice, direct monitoring, room to grow
Record vocals and guitar together XLR + interface Needs a mic input and an instrument input
Do video calls and voice-over on a laptop USB Plug and play, easy to travel with
Build a home studio over time XLR + interface Upgrade one part at a time

Hybrid mics: USB now, XLR later

Some mics have both outputs. Use USB on its own today, then run XLR into an interface or podcast mixer later. The mic doesn’t become a paperweight when you upgrade.

Shure

Shure MV7+

Dynamic mic with both USB-C and XLR outputs. Start with USB only, add an interface later.

Type
Dynamic, cardioid
Outputs
USB-C and XLR
Frequency response
50 Hz – 16 kHz

According to Shure, the MV7+ is a dynamic cardioid mic with USB-C and XLR outputs. It records up to 24-bit/48 kHz over USB and needs no phantom power over XLR. Its denoiser and digital pop filter work over USB through Shure’s MOTIV Mix software.

Mostly singing in a quiet room? The RØDE NT1 5th Generation condenser also has both XLR and USB-C outputs. You’ll find it in our best microphones for vocals at home.

Going XLR? Start with this interface

Focusrite

Focusrite Scarlett 2i2 (4th Gen)

Two-mic-input USB-C interface with Auto Gain and Clip Safe, so beginners can set levels without guessing.

Inputs
2 mic preamps (combo XLR/line/instrument)
Outputs
2 balanced line outputs, 1 headphone output
Conversion
24-bit / up to 192 kHz

Two mic inputs give you the most room to work: a host and a guest, or a vocal and a guitar. Focusrite lists 69 dB of preamp gain and Auto Gain for the Scarlett 2i2 4th Gen. If you’ll only ever record one thing at a time, the one-input Scarlett Solo from our starter home studio stack is plenty. There are more options in best audio interfaces for home recording.

Need a classic XLR dynamic to plug into it? The Shure SM58 doesn’t need phantom power and is forgiving in untreated rooms.

Shure

Shure SM58

The standard handheld vocal dynamic mic. Rugged, needs no phantom power and rejects much of the room behind it.

Type
Dynamic, cardioid
Frequency response
50 Hz – 15 kHz
Pop filter
Built-in spherical wind and pop filter

Two people? Skip USB

Two hosts at one desk? Two XLR mics into a two-input interface or a podcast mixer is far simpler than wrestling with two USB mics. Our two-person podcast stack lays out the whole setup, from mics and mixer to headphones and boom arms.

Ready to build your setup?

Start with what you’re recording this month, not what you might record in two years. If that’s only your voice, a USB or hybrid mic will get you going today. You can browse all our microphones and audio interfaces when you’re ready to pick.